Engine Rebuilds & Preparation
We are ideally placed to provide you with the ultimate quality rebuilds on all of our own TKM products as well as other branded engines.
Our skilled technicians build the engines in the first place and so have the perfect knowledge and experience to carry out every type of work on engines from a simple service through to a major rebuild.
We guarantee that our engines will perform at their best and provide best life if rebuilt by us and run according to our specific guidelines on carburation etc. We can also carry out performance optimisation and test engines on our dyno.
If you have a problem with an engine we will provide a quick diagnosis and recommendation on what is required at a nominal low cost.
All kart engines require rebuilds from time to time. The exact time between rebuilds depends partly on their use in terms of maximum revs, carburation etc. We give guidance in our detail information on each of our engines models.
When we rebuild an engine we carry out a full check right through the engine and will normally expect to be changing items such as bearings, piston, seals, gaskets, crankpin, etc. You can be confident that the engine you take away will be as good as new. We always give you a bag of your old components just so you know and have peace of mind that new replacement parts have been fitted.
Full details on engine rebuild costs and conversions can be seen on the following data sheets.
TKM BT82 2-Stroke Engine Service and Conversion Costs
Note: On the sheets Full Engine Fiche is to Tal-Ko Factory specification
TKM K4S 4-Stroke Engine Service Costs