Stub Axle M10 - 25mm NEW S Model
STUB AXLE ASSEMBLY NEW S MODEL 2022 VELOCE
M10 KING PIN BOLT with 25MM CARTRIDGE INSERT SHAFTS
-
STUB AXLE BS M1025N +0.5 CARTRIDGE INSERT TYPE 2022
Part No: KSSTUBBSM1025NS05
Veloce Chrome Steel Brake Left Hand Side Stub Axle +0.5 Degree
Complete with Standard SOFT Stiffness Cartridge Insert 25mm Stub Shaft, M10 Bearings & Internal Bearing Spacer Tube.
NEW CARTRIDGE INSERT 2022 DESIGN Fits M10 Kingpin & 25mm Wheel Bearing.
Will fit old model Tal-Ko Veloce Chassis and New 2022 Veloce S Chassis.
£104.00
( ex. vat )
-
STUB AXLE BS M1025N +0.5 CARTRIDGE LESS INSERT TYPE 2022
Part No: KSSTUBBSM10N05
Veloce Chrome Steel Brake Left Hand Side Stub Axle +0.5 Degree
Complete with M10 Bearings & Internal Bearing Spacer Tube.
Does not include Cartridge Insert 25mm Stub Shaft or M6 Bolt & Nut
NEW CARTRIDGE INSERT 2022 DESIGN Fits M10 Kingpin.
Will fit old model Tal-Ko Veloce Chassis and New 2022 Veloce SChassis.
£75.00
( ex. vat )
-
STUB AXLE ES M1025N +0.5 CARTRIDGE INSERT TYPE 2022
Part No: KSSTUBESM1025NS05
Veloce Chrome Steel Engine Right Hand Side Stub Axle +0.5 Degree
Complete with Standard SOFT Stiffness Cartridge Insert 25mm Stub Shaft, M10 Bearings & Internal Bearing Spacer Tube.
NEW CARTRIDGE INSERT 2022 DESIGN Fits M10 Kingpin & 25mm Wheel Bearing.
Will fit old model Tal-Ko Veloce Chassis and New 2022 Veloce SChassis.
£104.00
( ex. vat )
-
STUB AXLE ES M1025N +0.5 CARTRIDGE LESS INSERT TYPE 2022
Part No: KSSTUBESM10N05
Veloce Chrome Steel Engine Right Hand Side Stub Axle +0.5 Degree
Complete with M10 Bearings & Internal Bearing Spacer Tube.
Does not include Cartridge Insert 25mm Stub Shaft or M6 Bolt & Nut
NEW CARTRIDGE INSERT 2022 DESIGN Fits M10 Kingpin.
Will fit old model Tal-Ko Veloce Chassis and New 2022 Veloce SChassis.
£75.00
( ex. vat )
-
STUB AXLE ES M1025N +1.5 CARTRIDGE INSERT TYPE 2022
Part No: KSSTUBESM1025NS15
Veloce Chrome Steel Engine Right Hand Side Stub Axle +1.5 Degree
Complete with Standard SOFT Stiffness Cartridge Insert 25mm Stub Shaft, M10 Bearings & Internal Bearing Spacer Tube.
NEW CARTRIDGE INSERT 2022 DESIGN Fits M10 Kingpin & 25mm Wheel Bearing.
Will fit old model Tal-Ko Veloce Chassis and New 2022 Veloce SChassis.
£104.00
( ex. vat )
-
STUB AXLE ES M1025N +1.5 CARTRIDGE LESS INSERT TYPE 2022
Part No: KSSTUBESM1025N15
Veloce Chrome Steel Engine Right Hand Side Stub Axle +1.5 Degree
Complete with M10 Bearings & Internal Bearing Spacer Tube.
Does not include Cartridge Insert 25mm Stub Shaft or M6 Bolt & Nut
NEW CARTRIDGE INSERT 2022 DESIGN Fits M10 Kingpin.
Will fit old model Tal-Ko Veloce Chassis and New 2022 Veloce S Chassis.
£75.00
( ex. vat )
-
STUB AXLE BS M1025N +1.5 CARTRIDGE INSERT TYPE 2022
Part No: KSSTUMBSM1025NS15
Veloce Chrome Steel Brake Left Hand Side Stub Axle +1.5 Degree
Complete with Standard SOFT Stiffness Cartridge Insert 25mm Stub Shaft, M10 Bearings & Internal Bearing Spacer Tube.
NEW CARTRIDGE INSERT 2022 DESIGN Fits M10 Kingpin & 25mm Wheel Bearing.
Will fit old model Tal-Ko Veloce Chassis and New 2022 Veloce S Chassis.
£104.00
( ex. vat )
-
STUB AXLE BS M1025N +1.5 CARTRIDGE LESS INSERT TYPE 2022
Part No: KSSTUBBSM1025N15
Veloce Chrome Steel Brake Left Hand Side Stub Axle +1.5 Degree
Complete with M10 Bearings & Internal Bearing Spacer Tube.
Does not include Cartridge Insert 25mm Stub Shaft or M6 Bolt & Nut
NEW CARTRIDGE INSERT 2022 DESIGN Fits M10 Kingpin.
Will fit old model Tal-Ko Veloce Chassis and New 2022 Veloce S Chassis.
£75.00
( ex. vat )
-
STUB AXLE CARTRIDGE INSERT SHAFT STANDARD SOFT
Part No: KSSTUBCI25NS
Veloce STANDARD SOFT Stiffness Cartridge Insert 25mm Stub Shaft. Special Material Steel. NEW PRECISION CNC MACHINED CARTRIDGE INSERT 2022 DESIGN
£31.00
( ex. vat )
-
STUB AXLECARTRIDGE INSERT SHAFT MEDIUM
Part No: KSSTUBCI25NM
Veloce MEDIUM Stiffness Cartridge Insert 25mm Stub Shaft. Special Material Steel. NEW PRECISION CNC MACHINED CARTRIDGE INSERT 2022 DESIGN. 1 GROOVE on shaft end denotes MEDIUM
£31.00
( ex. vat )
-
STUB AXLE CARTRIDGE INSERT SHAFT HARD
Part No: KSSTUBCI25NH
Veloce HARD Stiffness Cartridge Insert 25mm Stub Shaft. Special Material Steel. NEW PRECISION CNC MACHINED CARTRIDGE INSERT 2022 DESIGN. 2 GROOVES on shaft end denotes HARD
£31.00
( ex. vat )
-
M6 X 40 BOLT LOW HEAD DRILLED ZINC
Part No: BOLHM640HZ
M6 X 40mm LOW HEAD DRILLED Long Bolt Zinc Plated. For fixing Veloce 2022 Caratridge Type Stub Axle Shafts with Safety Wire Clip Hole Drilled in Thread End.
£3.75
( ex. vat )
-
M6 x 12 WASHER
Part No: WASM612
M6 x 12mm O/D WASHER
£0.12
( ex. vat )
-
M6 FULL NUT NYLOC
Part No: NUTNYM6F
M6 NYLOC FULL THICKNESS NUT
£0.23
( ex. vat )
-
SAFETY R-CLIP M6
Part No: RCLIPM6
Safety R-Clip M6 for Tal-Ko Veloce S model Cartridge Stub Axle Insert Bolts
£0.90
( ex. vat )
-
BOX SPANNER FOR STUB AXLE NYLOC SLOTTED NUT
Part No: TBSPSNUT
BOX SPANNER for NYLOC SLOTTED NUT M25 on Veloce Cartridge Insert Stub Axles. This spanner only fit Veloce Stub Nuts and not Birel.
£27.95
( ex. vat )
-
NYLOC SLOTTED NUT M25 x 1.5
Part No: NUTNYSLM2515
NYLOC SLOTTED NUT M25 x 1.5 Pitch x Slot Type for Veloce Stub Axles S MODEL 2022.
£5.35
( ex. vat )
-
CIR-CLIP STUB AXLE 23MM
Part No: KSSTUBCC23
CIR-CLIP for 23mm Veloce Stub Axles Nuts on Cartridge Insert Shafts. Fits on End of Thread as Secondary Safety.
£1.60
( ex. vat )
-
CRG STUB AXLE WHEEL SPACER D25 x 4 BLACK
Part No: FAN.01738
CRG Stub Axle Wheel Spacer 4mm Thick for 25mm Stub Shafts. Black Anodised Aluminium
£3.85
( ex. vat )
-
R/R STUB AXLE WHEEL SPACER D25 x 5 BLACK
Part No: KWSPAC525B
R/R Stub Axle Wheel Spacer 5mm Thick for 25mm Stub Shafts. Black Anodised Aluminium
£3.15
( ex. vat )
-
CRG STUB AXLE WHEEL SPACER D25 x 8 BLACK
Part No: FAN.01739
CRG Stub Axle Wheel Spacer 8mm Thick for 25mm Stub Shafts. Black Anodised Aluminium
£4.55
( ex. vat )
-
R/R STUB AXLE WHEEL SPACER D25 x 10 BLACK
Part No: KWSPAC1025B
R/R Stub Axle Wheel Spacer 10mm Thick for 25mm Stub Shafts. Black Anodised Aluminium
£3.35
( ex. vat )
-
R/R STUB AXLE WHEEL SPACER D25 x 25 BLACK
Part No: KWSPAC2525B
R/R Stub Axle Wheel Spacer 25mm Thick for 25mm Stub Shafts. Black Anodised Aluminium
£3.75
( ex. vat )
-
CRG STUB AXLE BOLT M10 X 100
Part No: FBN.01608
CRG Steel M10 x 100mm Long Stub Bolt
£11.25
( ex. vat )
-
TAL-KO VELOCE STUB AXLE CASTER SPERICAL BUSH NEW
Part No: KSSTUBSPHBM10N
Tal-Ko Veloce Stub Axle Steel Caster Sperical Bush for M10 Kingpins. Has smaller I/D Bore to fit snug on M10 Kingpin bolts.
£6.25
( ex. vat )
-
TAL-KO VELOCE STUB AXLE CASTER FIXED CENTRAL NEW 22.4mm DIA FIT NEW
Part No: KSSTUBCFN224
Tal-Ko Veloce Stub Axle Steel Caster Fixed Central with No Holes for Adjustments. Fits all Veloce model karts from 2020 with 22.4mm Dia Hole or modified older models to take this larger diameter fit. Has a machine groove on top outer face to denote new larger fit diameter to chassis.
£11.50
( ex. vat )
-
TAL-KO VELOCE STUB AXLE SPACER M10 x 3 F NEW 2019
Part No: KSSTUBSPACM3F
TAL-KO VELOCE Stub Axle Steel Spacer for Right Height Adjustments. For M10 Kingpin with One Side Flat with 0.8mm raised reinforcing boss to be placed to chassis frame.
3.8mm Thick with 28mm O/D. This new stronger part is a direct replacement for the CRG part FZ0.01769.
£5.50
( ex. vat )
-
STUB AXLE BEARING M10 x 8 x 26
Part No: KSBEARM10826
Stub Axle Bearing for M10 Kingpin. 8mm Wide with 26mm O/D
£2.95
( ex. vat )
-
CRG STUB AXLE INTERNAL SPACER TUBE M10 x 24
Part No: SBN.01605
CRG Stub Axle Internal Steel Bearing Spacer Tube for M10 Stub Bearings. 10mm I/D x 14mm O/D x 24.5mm Long
£1.68
( ex. vat )
-
TAL-KO VELOCE STUB AXLE SPACER M10 x 14.3 F NEW
Part No: KSSTUBSPACM143F
Tal-Ko Veloce Stub Axle Steel Spacer for Right Height Adjustments. For M10 Kingpin with One Side Flat to be placed to chassis frame and 14.3mm Thick with 28mm O/D.
This thicker spacer replaces 3 of the other spacers when all put together giving not only an easier assembly but also a more rigid and lighter setup than the three multiple spacers it replaces.
£6.50
( ex. vat )
-
CRG STUB AXLE SPACER M10 x 3
Part No: FZ0.01770
CRG Stub Axle Steel Spacer for Right Height Adjustments. For M10 Kingpin with Both Sides Tapered and 3mm Thick with 28mm O/D
£4.50
( ex. vat )
-
CRG STUB AXLE SPACER M10 x 6
Part No: FZ0.01719
CRG Stub Axle Steel Spacer for Right Height Adjustments. For M10 Kingpin with Both Sides Tapered and 6mm Thick with 28mm O/D
£4.50
( ex. vat )
-
NYLOC NUT M10
Part No: NUTNYM10
Nyloc Nut M10 x 17 A/F
£0.42
( ex. vat )