Default welcome msg!

*NEW PRODUCTS*

6 Item(s)

per page

Set Ascending Direction
  1. AMV REAR WHEEL MAG R212

    AMV REAR WHEEL MAG R212

    Part No: AMVKWR212
    AMV REAR WHEEL 100% MAG for DRY 212mm Wide Incs: Valves & Bead Screws. New AMV magnesium wheels are the result of years of research and development in magnesium casting. These wheels are cast with the new AMV low pressure machine, using 100% pure AZ91 magnesium. This improves the heat transfer, which helps to stabilize the tire temperature and pressure rise, for a better and longer tire performance during all race.
    £103.50 ( ex. vat )


  2. AMV FRONT WHEEL MAG  F130-55

    AMV FRONT WHEEL MAG F130-55

    Part No: AMVKWF130H55
    AMV FRONT WHEEL 100% MAG for DRY 130mm Wide for 55mm I/D Front Hubs. Incs: Valves & Bead Screws. New AMV magnesium wheels are the result of years of research and development in magnesium casting. These wheels are cast with the new AMV low pressure machine, using 100% pure AZ91 magnesium. This improves the heat transfer, which helps to stabilize the tire temperature and pressure rise, for a better and longer tire performance during all race.
    £73.50 ( ex. vat )


  3. AMV WHEEL SET MAG for DRY  F130-55 / R212

    AMV WHEEL SET MAG for DRY F130-55 / R212

    Part No: AMVKWS130H55212D
    AMV WHEEL SET 100% MAG for DRY 130mm Wide Fronts for 55mm I/D Front Hubs & 212mm Wide Rears Incs: Valves & Bead Screws. New AMV magnesium wheels are the result of years of research and development in magnesium casting. These wheels are cast with the new AMV low pressure machine, using 100% pure AZ91 magnesium. This improves the heat transfer, which helps to stabilize the tire temperature and pressure rise, for a better and longer tire performance during all race.
    £305.00 ( ex. vat )


  4. TKM BT82 EXHAUST FLEX SLEEVE TIE WRAP

    TKM BT82 EXHAUST FLEX SLEEVE TIE WRAP

    Part No: BTSLTW
    STAINLESS STEEL TIE WRAP to Fix Exhaust Flex Sleeve 250mm Long x 4.5mm Wide Easy to fit and make a perfect job. Requires 2 for best job placed at each end of sleeve. Must not be tightened too much as this will damage sleeving.
    £0.40 ( ex. vat )


  5. TKM BT82 EXHAUST FLEX SLEEVE 120MM LONG

    TKM BT82 EXHAUST FLEX SLEEVE 120MM LONG

    Part No: BTSL120
    FLEX SLEEVE for Exhaust 120mm Long. Fits TAG Exhaust . SILICONE COATED, WOVEN INSULATED GLASS FIBRE, HIGH TEMP Best Quality. This sleeving must carefully be cut to length (should get 3 pieces per length) using sharp long scissors and secured at each end with BTSLTW ties to prevent splitting. Over stretching of this sleeve will damage it. Make sure on the larger flex TAG exhausts that the sleeve is fitted so that the sleeve is at least 10mm clear of spring ends on exhaust pipe side or damage/splitting will occur.
    £8.50 ( ex. vat )


  6. TKM BT82 EXHAUST FLEX SLEEVE 40MM LONG

    TKM BT82 EXHAUST FLEX SLEEVE 40MM LONG

    Part No: BTSL40
    FLEX SLEEVE for Exhaust 40mm Long. Fits TAG Exhaust . SILICONE COATED, WOVEN INSULATED GLASS FIBRE, HIGH TEMP Best Quality. Must be carefully secured at each end with BTSLTW ties to prevent splitting. Over stretching of this sleeve will damage it. Make sure on the larger flex TAG exhausts that the sleeve is fitted so that the sleeve is at least 10mm clear of spring ends on exhaust pipe side or damage/splitting will occur.
    £3.75 ( ex. vat )


6 Item(s)

per page

Set Ascending Direction