Default welcome msg!

Engine Mounts

ENGINE MOUNTS

25 Item(s)

per page

Set Ascending Direction
  1. WK ENGINE MOUNT ADJUSTER BOLT M10 x 87 TITANIUM

    WK ENGINE MOUNT ADJUSTER BOLT M10 x 87 TITANIUM

    Part No: WKMBOM1087T
    Wild KartEngine Mount Adjuster Bolt M10 X 87mm Long with CNC Aluminium Titanium Anodised Head.
    £5.25 ( ex. vat )


  2. WK ENGINE MOUNT ADJUSTER BOLT M10 x 87 BLACK

    WK ENGINE MOUNT ADJUSTER BOLT M10 x 87 BLACK

    Part No: WKMBOM1087N
    Wild KartEngine Mount Adjuster Bolt M10 X 87mm Long with CNC Aluminium Black Anodised Head.
    £5.25 ( ex. vat )


  3. WK ENGINE MOUNT ADJUSTER BOLT M10 x 82 GOLD

    WK ENGINE MOUNT ADJUSTER BOLT M10 x 82 GOLD

    Part No: WKMBOM1082AR
    Wild KartEngine Mount Adjuster Bolt M10 X 82mm Long with CNC Aluminium Gold Anodised Head.
    £5.25 ( ex. vat )


  4. R/R ENGINE MOUNT ADJUSTER BOLT M10 x 85

    R/R ENGINE MOUNT ADJUSTER BOLT M10 x 85

    Part No: KMBOM1085P
    R/R Engine Mount Adjuster Padded Bolt Head M10 X 85mm Long
    £3.95 ( ex. vat )


  5. ENGINE MOUNT ADJUSTER SCREW

    ENGINE MOUNT ADJUSTER SCREW

    Part No: AFS.00254
    Engine Mount Adjuster Padded Bolt Head M10
    £4.50 ( ex. vat )


  6. PLAIN NUT M10

    PLAIN NUT M10

    Part No: NUTM10
    Plain Nut M10 x 17 A/F
    £0.32 ( ex. vat )


  7. BOLT M10 x 80 HEX HEAD

    BOLT M10 x 80 HEX HEAD

    Part No: BOHM1080
    Engine Mount Adjuster Bolt M10 x 80mm Long
    £1.67 ( ex. vat )


  8. TAL-KO ADJUSTING MOUNT ASSEMBLY

    TAL-KO ADJUSTING MOUNT ASSEMBLY

    Part No: KMBOASSB
    TAL-KO Engine Mount Adjuster Assembly Complete with M10 Bolt & Nut Fixing is by 2 off M6 bolts X 93mm Centres. Black Anodised Aluminium
    £19.50 ( ex. vat )


  9. TAL-KO ADJUSTING MOUNT BLOCK S MODEL

    TAL-KO ADJUSTING MOUNT BLOCK S MODEL

    Part No: KMADJBBS
    Tal-Ko Racing Engine Mount Adjuster Block for M10 Bolt & Nut . Fixing is by 2 off M6 bolts X 93mm Centres. Black Anodised Aluminium
    £21.50 ( ex. vat )


  10. BOLT M10 X 45

    BOLT M10 X 45

    Part No: BOM1045
    M10 X 45mm Long Bolt for Chassis Engine Mount Clamp
    £0.70 ( ex. vat )


  11. BOLT M10 X 40

    BOLT M10 X 40

    Part No: BOM1040
    M10 X 40mm Long Bolt for Chassis Engine Mount Clamp
    £0.65 ( ex. vat )


  12. SKM ENGINE MOUNT CLAMP 32 x 92 mm GOLD

    SKM ENGINE MOUNT CLAMP 32 x 92 mm GOLD

    Part No: KMCL9232GSKM
    SKM Clamp for Engine Mount 32mm O/D Chassis Tube with 92mm Centres. 50mm Axle. CNC Gold Anodised Aluminium.
    £4.50 ( ex. vat )


  13. ENGINE MOUNT CLAMP FLUSH 32 X 92MM

    ENGINE MOUNT CLAMP FLUSH 32 X 92MM

    Part No: KMCL9232C
    CNC Machined Aluminium Engine Mount Clamp to Fit Chassis with 32mm Tubes on 92mm Centre Lines. Uses M10 Centre Bolt. Bolt not included. This type of Clamp give Extra Ground Clearance and is Black Anodised.
    £11.95 ( ex. vat )


  14. ENGINE MOUNT CLAMP FLUSH 30 X 92MM

    ENGINE MOUNT CLAMP FLUSH 30 X 92MM

    Part No: KMCL9230C
    CNC Machined Aluminium Engine Mount Clamp to Fit Chassis with 30mm Tubes on 92mm Centre Lines. Uses M10 Centre Bolt. Bolt not included. This type of Clamp give Extra Ground Clearance and is Black Anodised.
    £11.95 ( ex. vat )


  15. ENGINE MOUNT PRE-DRILLED COMPLETE FLUSH 32 X 92MM

    ENGINE MOUNT PRE-DRILLED COMPLETE FLUSH 32 X 92MM

    Part No: KMCOM9232FC
    Cast Aluminium Engine Mount Complete with Flush Type Clamps & Clamp Bolts to Fit Chassis with 32mm Tubes on 92mm Centre Lines. Pre-Drilled for engines with 80mm X 102mm & 80mm X 123mm Bolt Centres. Mating Face is machined. Fits all TKM BT82 engines.
    £59.50 ( ex. vat )


  16. ENGINE MOUNT PRE-DRILLED COMPLETE FLUSH 30 X 92MM

    ENGINE MOUNT PRE-DRILLED COMPLETE FLUSH 30 X 92MM

    Part No: KMCOM9230FC
    Cast Aluminium Engine Mount Complete with Flush Type Clamps & Clamp Bolts to Fit Chassis with 30mm Tubes on 92mm Centre Lines. Pre-Drilled for engines with 80mm X 102mm & 80mm X 123mm Bolt Centres. Mating Face is machined. Fits all TKM BT82 engines.
    £59.50 ( ex. vat )


  17. ENGINE MOUNT CLAMP STD 32 X 92MM

    ENGINE MOUNT CLAMP STD 32 X 92MM

    Part No: KMCL9232
    Cast Aluminium Engine Mount Clamp to Fit Chassis with 32mm Tubes on 92mm Centre Lines. Uses M10 Centre Bolt. Bolt not included
    £6.75 ( ex. vat )


  18. ENGINE MOUNT CLAMP STD 30 X 92MM

    ENGINE MOUNT CLAMP STD 30 X 92MM

    Part No: KMCL9230
    Cast Aluminium Engine Mount Clamp to Fit Chassis with 30mm Tubes on 92mm Centre Lines. Uses M10 Centre Bolt. Bolt not included
    £6.75 ( ex. vat )


  19. ENGINE MOUNT PRE-DRILLED COMPLETE STD 32 X 92MM

    ENGINE MOUNT PRE-DRILLED COMPLETE STD 32 X 92MM

    Part No: KMCOM9232
    Cast Aluminium Engine Mount Complete with Clamps & Clamp Bolts to Fit Chassis with 32mm Tubes on 92mm Centre Lines. Pre-Drilled for engines with 80mm X 102mm & 80mm X 123mm Bolt Centres. Mating Face is machined. Fits all TKM BT82 engines.
    £48.50 ( ex. vat )


  20. ENGINE MOUNT PRE-DRILLED COMPLETE STD 30 X 92MM

    ENGINE MOUNT PRE-DRILLED COMPLETE STD 30 X 92MM

    Part No: KMCOM9230
    Cast Aluminium Engine Mount Complete with Clamps & Clamp Bolts to Fit Chassis with 30mm Tubes on 92mm Centre Lines. Pre-Drilled for engines with 80mm X 102mm & 80mm X 123mm Bolt Centres. Mating Face is machined. Fits all TKM BT82 engines.
    £48.50 ( ex. vat )


  21. ENGINE MOUNT CLAMP FLUSH 28 X 92MM

    ENGINE MOUNT CLAMP FLUSH 28 X 92MM

    Part No: KMCL9228C
    CNC Machined Aluminium Engine Mount Clamp to Fit Chassis with 28mm Tubes on 92mm Centre Lines. Uses M10 Centre Bolt. Bolt not included. This type of Clamp give Extra Ground Clearance and is Black Anodised.
    £11.95 ( ex. vat )


  22. ENGINE MOUNT TOP PLATE PRE-DRILLED STD 28 X 91/92MM DUAL FIT

    ENGINE MOUNT TOP PLATE PRE-DRILLED STD 28 X 91/92MM DUAL FIT

    Part No: KMTP91/9228
    Cast Aluminium Engine Mount Top Plate to Fit Chassis with 28mm Tubes on 91/92mm Centre Lines.

    Fits Synergy Envy & Birel Art Cadet & Inter Karts with 91mm Tube Centres and also Standard Karts with 92mm Tube Centres.

    Pre-Drilled for engines with 80mm X 102mm & 80mm X 123mm Bolt Centres. Mating Face is machined. Weighs 658 Grams.

    Fits all TKM BT82 engines.
    £36.00 ( ex. vat )


  23. ENGINE MOUNT CLAMP STD 28 X 92MM

    ENGINE MOUNT CLAMP STD 28 X 92MM

    Part No: KMCL9228
    Cast Aluminium Engine Mount Clamp to Fit Chassis with 28mm Tubes on 92mm Centre Lines. Uses M10 Centre Bolt. Bolt not included
    £6.75 ( ex. vat )


  24. ENGINE MOUNT TOP PLATE PRE-DRILLED STD 32 X 92MM

    ENGINE MOUNT TOP PLATE PRE-DRILLED STD 32 X 92MM

    Part No: KMTP9232
    Cast Aluminium Engine Mount Top Plate to Fit Chassis with 32mm Tubes on 92mm Centre Lines. Pre-Drilled for engines with 80mm X 102mm & 80mm X 123mm Bolt Centres. Mating Face is machined. Weighs 658 Grams. Fits all TKM BT82 engines.
    £36.00 ( ex. vat )


  25. ENGINE MOUNT TOP PLATE PRE-DRILLED STD 30 X 92MM

    ENGINE MOUNT TOP PLATE PRE-DRILLED STD 30 X 92MM

    Part No: KMTP9230
    Cast Aluminium Engine Mount Top Plate to Fit Chassis with 30mm Tubes on 92mm Centre Lines. Pre-Drilled for engines with 80mm X 102mm & 80mm X 123mm Bolt Centres. Mating Face is machined. Weighs 658 Grams. Fits all TKM BT82 engines.
    £36.00 ( ex. vat )


25 Item(s)

per page

Set Ascending Direction
My Cart

You have no items in your shopping cart.

        
 
GET IN TOUCH
Tal-Ko Racing Ltd. 54 Sunderland Road, Sandy, Bedfordshire, SG19 1QY
Phone +44 (0)1767 682020 Fax +44 (0)1767 691622 Email info@tal-ko.com
Tal-Ko Racing Ltd. is registered for VAT No: 804772429
TAL-KO RACING
Home | News Centre | Engines | Showroom
Copyright TAL-KO Racing Ltd.
All Rights Reserved.
Privacy and Cookie Policy | Sitemap
Terms & Conditions | Delivery Terms
Pebble Web Design