Default welcome msg!

Brackets & Accessories

 BRACKETS & ACCESSORIES

69 Item(s)

per page

Set Descending Direction
  1. IGNITION CUT OUT SWITCH BRACKET

    IGNITION CUT OUT SWITCH BRACKET

    Part No: KBRKIGN
    Bracket for Mounting the Ignition Cut Out Switch to the Steering Column Top Support Bolt. Marked with ON / OFF Zinc Plate Steel
    £4.95 ( ex. vat )


  2. CRG BRAKE DISC PROTECTOR KIT NEW

    CRG BRAKE DISC PROTECTOR KIT NEW

    Part No: FK0.03437
    CRG Brake Disc Protector Kit Complete. Incs Plastic Skid and Silver Coloured Steel Mounting Bracket with Fixings. Fits 4 Hole Axle Bearing Type Chassis
    £33.50 ( ex. vat )


  3. CRG BRAKE DISC PROTECTOR SKID

    CRG BRAKE DISC PROTECTOR SKID

    Part No: AFS.01632
    CRG Brake Disc Protector Plastic Skid Bare
    £14.10 ( ex. vat )


  4. RR BRAKE DISC PROTECTOR KIT NEW

    RR BRAKE DISC PROTECTOR KIT NEW

    Part No: KBDPKIT
    Brake Disc Protector Kit Complete. Incs Plastic Skid and Chrome Steel Mounting Bracket with Fixings. Fits 4 Hole Axle Bearing Type Chassis
    £25.00 ( ex. vat )


  5. RR BRAKE DISC PROTECTOR SKID

    RR BRAKE DISC PROTECTOR SKID

    Part No: KBDPSKID
    WHITE PLASTIC Brake Disc Protector
    £7.50 ( ex. vat )


  6. FUEL PIPE & CABLE CHASSIS RING SLEEVE

    FUEL PIPE & CABLE CHASSIS RING SLEEVE

    Part No: KCRS
    Black Aluminium Chassis Ring Sleeve for Fuel Pipe & Cable Retention. Prevents fuel pipe from being squashed with cable ties. 14mm Long x 14.8mm O/D x 9.5mm I/D
    £1.95 ( ex. vat )


  7. M6 x 25 WASHER

    M6 x 25 WASHER

    Part No: WASM625
    WASHER Silver M6 x 25mm O/D
    £0.18 ( ex. vat )


  8. M8 x 30 WASHER

    M8 x 30 WASHER

    Part No: WASM830
    WASHER Silver M8 x 30 mm O/D Zinc Plated
    £0.20 ( ex. vat )


  9. WET COVER VELOCE BRAKE V05

    WET COVER VELOCE BRAKE V05

    Part No: KBCWC
    Carbon Look Wet Cover for V05 Brake Disc & Caliper on Tal-Ko Veloce Kart. Used for Torential Rain Conditions to keep Brake Disc Temps
    £20.00 ( ex. vat )


  10. VELOCE CHASSIS PROTECTOR SET 3

    VELOCE CHASSIS PROTECTOR SET 3

    Part No: KCPS
    Chassis Protector Set of 3 Material Hard Black Nylon MSA Homologated. Used for protection against wearing out chassis rails when riding kerbs. Pre-drilled to fit Mid 2013 onwards Tal-Ko Veloce & most Tony Karts.
    £37.50 ( ex. vat )


  11. ADJUSTING MOUNT ASSEMBLY

    ADJUSTING MOUNT ASSEMBLY

    Part No: KMBOASSB
    Engine Mount Adjuster Assembly Complete with M10 Bolt & Nut Black Anodised Aluminium
    £19.50 ( ex. vat )


  12. BOLT M10 x 80 HEX HEAD

    BOLT M10 x 80 HEX HEAD

    Part No: BOHM1080
    Engine Mount Adjuster Bolt M10 x 80mm Long
    £1.67 ( ex. vat )


  13. EXTENTION SLEEVES PEDAL SET 2 B

    EXTENTION SLEEVES PEDAL SET 2 B

    Part No: KPEDEXTS2
    Extention Pedal Sleeve Set of 2. Black Anodised Aluminium
    £30.00 ( ex. vat )


  14. ANTI SLIP SLEEVES PEDAL SET 2 B

    ANTI SLIP SLEEVES PEDAL SET 2 B

    Part No: KPEDASS2
    Anti Foot Slip Pedal Sleeve Set of 2. Black Anodised Aluminium
    £12.50 ( ex. vat )


  15. HEEL L REST SET 2

    HEEL L REST SET 2

    Part No: KHRL2
    HEEL L REST Set of 2. Black Plastic. Bolts to Floortray
    £2.80 ( ex. vat )


  16. HEEL CUP REST SET 2

    HEEL CUP REST SET 2

    Part No: KHR2
    HEEL CUP REST Set of 2. Black Plastic. Bolts to Floortray
    £5.83 ( ex. vat )


  17. TAL-KO VELOCE ADJUSTABLE HEEL REST SET

    TAL-KO VELOCE ADJUSTABLE HEEL REST SET

    Part No: KPHRS
    ADJUSTABLE HEEL REST SET COMPLETE with Fixing for 2017 onwards Tal-Ko Veloce Karts. Full CNC Machined Aluminium Black Anodised.
    Set comprises of 3 x M6 x 25 Bolts with washers and nyloc nuts, 2 x M8 x 40 Bolts with 5mm & 10mm Thick Aluminium Adjusting Spacers.
    In conjustion with these spacers and multiple hole fixing on Veloce Chassis a full range of positions can be achieved for most drivers. Total weight with fix bolts is 312 grams.
    £68.00 ( ex. vat )


  18. TAL-KO VELOCE HEEL REST BLOCK

    TAL-KO VELOCE HEEL REST BLOCK

    Part No: KPHRB
    HEEL REST BLOCK for 2017 onwards Tal-Ko Veloce Karts. Full CNC Machined Aluminium Black Anodised.
    £23.50 ( ex. vat )


  19. TAL-KO VELOCE HEEL REST BAR

    TAL-KO VELOCE HEEL REST BAR

    Part No: KPHRBAR
    HEEL REST BAR for 2017 onwards Tal-Ko Veloce Karts. Full CNC Machined Aluminium Black Anodised.
    £32.00 ( ex. vat )


  20. TAL-KO VELOCE HEEL REST SPACER 5MM

    TAL-KO VELOCE HEEL REST SPACER 5MM

    Part No: KHRSPACM8155B
    HEEL REST SPACER for 2017 onwards Tal-Ko Veloce Karts. 5mm Thick x 15mm O/D with 8mm I/D. Full CNC Machined Aluminium Black Anodised.
    £3.95 ( ex. vat )


  21. TAL-KO VELOCE HEEL REST SPACER 10MM

    TAL-KO VELOCE HEEL REST SPACER 10MM

    Part No: KHRSPACM81510B
    HEEL REST SPACER for 2017 onwards Tal-Ko Veloce Karts. 10mm Thick x 15mm O/D with 8mm I/D. Full CNC Machined Aluminium Black Anodised.
    £3.95 ( ex. vat )


  22. AXLE SPROCKET PROTECTOR SET 2 195mm

    AXLE SPROCKET PROTECTOR SET 2 195mm

    Part No: KSPKPP195P
    Axle Sprocket Protector Set of 2. 195mm O/D for Sprockets up to 74 teeth. Black Special Material. Used for protection against loss of chain when riding kerbs.
    £29.00 ( ex. vat )


  23. AXLE SPROCKET PROTECTOR SET 2 210mm

    AXLE SPROCKET PROTECTOR SET 2 210mm

    Part No: KSPKPP210P
    Axle Sprocket Protector Set of 2. 210mm O/D for Sprockets up to 80 teeth. Black Special Material. Used for protection against loss of chain when riding kerbs.
    £29.00 ( ex. vat )


  24. AXLE SPROCKET PROTECTOR SET 2 244mm

    AXLE SPROCKET PROTECTOR SET 2 244mm

    Part No: KSPKPP244P
    Axle Sprocket Protector Set of 2. 244mm O/D for Sprockets up to 95 teeth. Black Special Material. Used for protection against loss of chain when riding kerbs.
    £29.00 ( ex. vat )


  25. AXLE SPROCKET PROTECTOR 185mm ALUMINIUM

    AXLE SPROCKET PROTECTOR 185mm ALUMINIUM

    Part No: KSPKAP185
    Axle Sprocket Protector. 185mm O/D for Sprockets up to 71 teeth. Gold Anodised Aluminium Used for protection against loss of chain when riding kerbs.
    Aluminium Sprocket Protectors are Not Allowed at some Tracks where Only Plastic is Permitted.
    £6.00 ( ex. vat )


  26. AXLE SPROCKET PROTECTOR 185mm ALUMINIUM TALON

    AXLE SPROCKET PROTECTOR 185mm ALUMINIUM TALON

    Part No: KSPKAP185T
    TALON Axle Sprocket Protector. 185mm O/D for Sprockets up to 71 teeth. Gold Anodised Aluminium Used for protection against loss of chain when riding kerbs.
    Aluminium Sprocket Protectors are Not Allowed at some Tracks where Only Plastic is Permitted.
    £6.50 ( ex. vat )


  27. AXLE SPROCKET PROTECTOR 193mm ALUMINIUM

    AXLE SPROCKET PROTECTOR 193mm ALUMINIUM

    Part No: KSPKAP193
    Axle Sprocket Protector. 193mm O/D for Sprockets up to 74 teeth. Gold Anodised Aluminium Used for protection against loss of chain when riding kerbs.
    Aluminium Sprocket Protectors are Not Allowed at some Tracks where Only Plastic is Permitted.
    £6.00 ( ex. vat )


  28. AXLE SPROCKET PROTECTOR 208mm ALUMINIUM

    AXLE SPROCKET PROTECTOR 208mm ALUMINIUM

    Part No: KSPKAP208
    Axle Sprocket Protector. 208mm O/D for Sprockets up to 80 teeth. Gold Anodised Aluminium Used for protection against loss of chain when riding kerbs.
    Aluminium Sprocket Protectors are Not Allowed at some Tracks where Only Plastic is Permitted.
    £6.50 ( ex. vat )


  29. AXLE SPROCKET PROTECTOR 230mm ALUMINIUM TALON

    AXLE SPROCKET PROTECTOR 230mm ALUMINIUM TALON

    Part No: KSPKAP230T
    TALON Axle Sprocket Protector. 230mm O/D for Sprockets up to 88 teeth. Gold Anodised Aluminium Used for protection against loss of chain when riding kerbs.
    Aluminium Sprocket Protectors are Not Allowed at some Tracks where Only Plastic is Permitted. ONLY ONE LEFT
    £7.50 ( ex. vat )


  30. SEAT STAY 280

    SEAT STAY 280

    Part No: KSESTAY280
    Chrome Plate Steel Additional Bolt On Seat Stay 280mm Long with M8 Holes for Fixing
    £7.00 ( ex. vat )


  31. SEAT STAY 320 VELOCE ENGINE SIDE

    SEAT STAY 320 VELOCE ENGINE SIDE

    Part No: KSESTAY320
    Chrome Plate Steel Additional Bolt On Seat Stay 320mm Bolt Centres Long with M8 Holes for Fixing
    £7.00 ( ex. vat )


  32. SEAT STAY 320 VELOCE BRAKE SIDE

    SEAT STAY 320 VELOCE BRAKE SIDE

    Part No: KSESTAY320BSV
    Chrome Plate Steel Additional Bolt On Cranked Seat Stay Veloce Kart Brake Side 320mm Bolt Centres Long with M8 Holes for Fixing
    £9.00 ( ex. vat )


  33. CRG CURVED SEAT STAY 32

    CRG CURVED SEAT STAY 32

    Part No: FC0.01389
    CRG Curved Seat Stay 32cm Long
    £15.90 ( ex. vat )


  34. CRG CURVED SEAT STAY 32 KF 2014

    CRG CURVED SEAT STAY 32 KF 2014

    Part No: FC0.03146
    CRG Curved Seat Stay 32cm Long KF 2014
    £16.82 ( ex. vat )


  35. SEAT STAY CRANKED ENGINE SIDE 325

    SEAT STAY CRANKED ENGINE SIDE 325

    Part No: KSESTAYES
    Chrome Plate Steel Round Tube Additional Bolt On Seat Stay 325mm Long with M8 Holes for Fixing Cranked to Clear Exhaust Manifold. Fits on the Middle Axle Bearing Bolt on 3 Bearing Kart
    £9.50 ( ex. vat )


  36. CRG CURVED SEAT STAY 34

    CRG CURVED SEAT STAY 34

    Part No: FC0.00752
    CRG Curved Seat Stay 34cm Long
    £16.82 ( ex. vat )


  37. SEAT STAY 360

    SEAT STAY 360

    Part No: KSESTAY360
    Chrome Plate Steel Additional Bolt On Seat Stay 360mm Long with M8 Holes for Fixing
    £7.00 ( ex. vat )


  38. CRG CURVED SEAT STAY 36

    CRG CURVED SEAT STAY 36

    Part No: FC0.01388
    CRG Curved Seat Stay 36cm Long
    £15.90 ( ex. vat )


  39. SEAT STAY STRAIGHT BRAKE SIDE 365

    SEAT STAY STRAIGHT BRAKE SIDE 365

    Part No: KSESTAYBSL
    Chrome Plate Steel Round Tube Additional Bolt On Seat Stay 365mm Long with M8 Holes for Fixing Cranked to Clear Exhaust Manifold
    £8.00 ( ex. vat )


  40. SEAT STAY CRANKED ENGINE SIDE 385

    SEAT STAY CRANKED ENGINE SIDE 385

    Part No: KSESTAYESL
    Chrome Plate Steel Round Tube Additional Bolt On Seat Stay 385mm Long with M8 Holes for Fixing Cranked to Clear Exhaust Manifold
    £9.50 ( ex. vat )


  41. SEAT SPACER WASHER M810

    SEAT SPACER WASHER M810

    Part No: KSEWASM81035
    Aluminium Spacer Washer M8 x 31.5mm O/D x 10mm Thick for Seat Fixing
    £4.11 ( ex. vat )


  42. SEAT SPACER WASHER M814

    SEAT SPACER WASHER M814

    Part No: KSEWASM81435
    Aluminium Spacer Washer M8 x 31.5mm O/D x 14mm Thick for Seat Fixing
    £4.43 ( ex. vat )


  43. SEAT SPACER WASHER M818

    SEAT SPACER WASHER M818

    Part No: KSEWASM81835
    Aluminium Spacer Washer M8 x 31.5mm O/D x 18mm Thick for Seat Fixing
    £4.74 ( ex. vat )


  44. SEAT SPACER WASHER M820

    SEAT SPACER WASHER M820

    Part No: KSEWASM82035
    Aluminium Spacer Washer M8 x 31.5mm O/D x 20mm Thick for Seat Fixing
    £5.06 ( ex. vat )


  45. SEAT SPACER WASHER M824

    SEAT SPACER WASHER M824

    Part No: KSEWASM82435
    Aluminium Spacer Washer M8 x 31.5mm O/D x 24mm Thick for Seat Fixing
    £5.38 ( ex. vat )


  46. PLASTIC SEAT WASHER SPACER M8298

    PLASTIC SEAT WASHER SPACER M8298

    Part No: KSEPWASM8298
    Black Plastic Seat Washer Spacer M8 x 29mm O/D x 8mm Thick for Seat Fixing
    £0.90 ( ex. vat )


  47. PLASTIC SEAT WASHER SPACER M82912

    PLASTIC SEAT WASHER SPACER M82912

    Part No: KSEPWASM82912
    Black Plastic Seat Washer Spacer M8 x 29mm O/D x 12mm Thick for Seat Fixing
    £1.14 ( ex. vat )


  48. SEAT PLATE WASHER M860

    SEAT PLATE WASHER M860

    Part No: KSEPLCM860
    Aluminium Circular Washer Plate M8 x 60mm O/D for Seat Fixing Black Anodised
    £1.80 ( ex. vat )


  49. M6 FLARED CSK WASHER G

    M6 FLARED CSK WASHER G

    Part No: WASFM618G
    M6 X 18mm O/D Flared Washer Gold Anodised Aluminium
    £1.47 ( ex. vat )


  50. M6 FLARED CSK WASHER B

    M6 FLARED CSK WASHER B

    Part No: WASFM618B
    M6 X 18mm O/D Flared Washer Black Anodised Aluminium
    £1.47 ( ex. vat )


  51. M8 FLARED CSK WASHER SEAT B

    M8 FLARED CSK WASHER SEAT B

    Part No: KSEFWASM834B
    M8 x 34mm O/D Aluminium Black Anodised Flared Washer for Seat Fixing
    £2.65 ( ex. vat )


  52. M8 FLARED CSK WASHER SEAT BLUE

    M8 FLARED CSK WASHER SEAT BLUE

    Part No: KSEFWASM834BL
    M8 x 34mm O/D Aluminium Blue Anodised Flared CSK Washer for Seat Fixing
    £2.65 ( ex. vat )


  53. M8 FLARED CSK WASHER BLUE

    M8 FLARED CSK WASHER BLUE

    Part No: WASFM822BL
    M8 x 22mm O/D Aluminium Blue Anodised Flared CSK Washer
    £1.60 ( ex. vat )


  54. M8 FLARED CSK WASHER GOLD

    M8 FLARED CSK WASHER GOLD

    Part No: WASFM820G
    M8 x 20mm O/D Aluminium Gold Anodised Flared CSK Washer
    £1.60 ( ex. vat )


  55. M8 FLARED CSK WASHER BLACK

    M8 FLARED CSK WASHER BLACK

    Part No: WASFM820B
    M8 x 20mm O/D Aluminium Black Anodised Flared CSK Washer
    £1.85 ( ex. vat )


  56. M10 FLARED CSK WASHER GOLD

    M10 FLARED CSK WASHER GOLD

    Part No: WASFM1023G
    M10 x 23mm O/D Aluminium Gold Anodised Flared CSK Washer
    £1.85 ( ex. vat )


  57. BOLT CSK M8 X 25mm

    BOLT CSK M8 X 25mm

    Part No: BOCSKM825
    M8 x 25mm Long CSK Bolt High Tensile
    £0.38 ( ex. vat )


  58. BOLT CSK M8 X 30mm Z

    BOLT CSK M8 X 30mm Z

    Part No: BOCSKM830Z
    M8 x 30mm Long CSK Bolt High Tensile Zinc Plated
    £0.45 ( ex. vat )


  59. BOLT CSK M8 X 35mm

    BOLT CSK M8 X 35mm

    Part No: BOCSKM835
    M8 x 35mm Long CSK Bolt High Tensile
    £0.45 ( ex. vat )


  60. BOLT CSK M8 X 40mm Z

    BOLT CSK M8 X 40mm Z

    Part No: BOCSKM840Z
    M8 x 40mm Long CSK Bolt High Tensile Zinc Plated
    £0.55 ( ex. vat )


  61. BOLT CSK M8 X 45mm

    BOLT CSK M8 X 45mm

    Part No: BOCSKM845
    M8 x 45mm Long CSK Bolt High Tensile
    £0.52 ( ex. vat )


  62. BOLT CSK M8 X 50mm

    BOLT CSK M8 X 50mm

    Part No: BOCSKM850
    M8 x 50mm Long CSK Bolt High Tensile
    £0.60 ( ex. vat )


  63. BOLT CSK M8 X 55mm Z

    BOLT CSK M8 X 55mm Z

    Part No: BOCSKM855Z
    M8 x 55mm Long CSK Bolt High Tensile Zinc Plated
    £0.75 ( ex. vat )


  64. BOLT CSK M8 X 65mm Z

    BOLT CSK M8 X 65mm Z

    Part No: BOCSKM865Z
    M8 x 65mm Long CSK Bolt High Tensile Zinc Plated
    £0.77 ( ex. vat )


  65. BOLT CSK M8 X 65mm

    BOLT CSK M8 X 65mm

    Part No: BOCSKM865
    M8 x 65mm Long CSK Bolt High Tensile
    £0.74 ( ex. vat )


  66. BOLT CSK M8 X 70mm

    BOLT CSK M8 X 70mm

    Part No: BOCSKM870
    M8 x 70mm Long CSK Bolt High Tensile
    £0.76 ( ex. vat )


  67. BOLT CSK M8 X 80mm

    BOLT CSK M8 X 80mm

    Part No: BOCSKM880
    M8 x 80mm Long CSK Bolt High Tensile
    £0.80 ( ex. vat )


  68. M8 X 16mm O/D WASHER

    M8 X 16mm O/D WASHER

    Part No: WASM816
    M8 x 16mm O/D Steel Zinc Plated Washer
    £0.14 ( ex. vat )


  69. NYLOC NUT M8

    NYLOC NUT M8

    Part No: NUTNYM8
    M8 Nyloc Nut
    £0.27 ( ex. vat )


69 Item(s)

per page

Set Descending Direction
My Cart

You have no items in your shopping cart.

 
GET IN TOUCH
Tal-Ko Racing Ltd. 54 Sunderland Road, Sandy, Bedfordshire, SG19 1QY
Phone +44 (0)1767 682020 Fax +44 (0)1767 691622 Email info@tal-ko.com
Tal-Ko Racing Ltd. is registered for VAT No: 804772429
TAL-KO RACING
Home | News Centre | Engines | Showroom
Copyright TAL-KO Racing Ltd.
All Rights Reserved.
Privacy and Cookie Policy | Sitemap
Terms & Conditions | Delivery Terms
Pebble Web Design