TILLOTSON HL CARB & PARTS

CARB GASKET Has a 21.5mm Hole with Pulse Hole for Small Bore Carbs and Restrictor Plates

TILLOTSON RACING STICKER for Kart 118mm Long X 27mm High (Shaped)
(HIGH QUALITY SCREEN PRINTED)

CARB GASKET 26mm Hole with Pulse Hole for most 100cc Engines

CARB GASKET 27.5mm Hole with Pulse Hole for most 100cc Engines

BLACK PLASTIC CARB FLANGE for HL TILLOTSON CARBS. Used to Mount Induction Air Box to Carb. Comes undrilled so you can drill to suit carb bolt spacing.
62mm O/D x 22mm Thick. Fix Bolt Hole Spacing can Range from 49mm to 37mm

THROTTLE CABLE BRACKET for TILLOTSON CARBS & Other Brands. Come with M6 Cable Adjuster Union & Nut.

TILLOTSON M6 LONG CARB FIX NUTS ( Pack of 2 ) 23mm Long with M6 Thread & 5mm A/F Hex for Allen Key Fit. Suitable for all Carbs with no Flange.

TILLOTSON SCREW for PLASTIC COVER. For Most Carbs

TILLOTSON FUEL FILTER SCREEN COVER. Blue Plastic For Most Carbs

TILLOTSON GASKET for FUEL FILTER SCREEN COVER. Material: CORK For Most Carbs

TILLOTSON FUEL FILTER SCREEN For Most Carbs

TILLOTSON HL FILTER TOP PLATE. Cast Aluminium For Most HL Series Carbs

TILLOTSON HL SCREW for PUMP BODY for Most HL Series Carbs

TILLOTSON PUMP DIAPHRAGM For Most HL Series Carbs

TILLOTSON GASKET for PUMP. For Most HL Series Carbs

TILLOTSON HL PUMP PLATE Cast Aluminium For Most HL Series Carbs where pulse action is via small hole in carb mounting face

TILLOTSON HL PUMP PLATE with PULSE ELBOW. Cast Aluminium For Most HL Series Carbs where pulse action cannot be via small hole in carb mounting face

TILLOTSON MAIN DIAPHRAGM For Most Carbs

TILLOTSON GASKET for MAIN DIAPHRAGM. For Most Carbs

TILLOTSON HALF REPAIR KIT for HL CARBS.

TILLOTSON FULL REPAIR KIT for HL CARBS.

TILLOTSON INLET VALVE NEEDLE SEAT & GASKET. CHROME 233-710-P. For Most Carbs

TILLOTSON INLET VALVE GASKET. Material: COPPER For Most Carbs

TILLOTSON PADDLE TENSION SPRING For most HL Series Carbs

TILLOTSON PADDLE LEVER for Most HL Series Carbs

TILLOTSON PADDLE PIN for Most Carbs

TILLOTSON SCREW for PADDLE PIN for Most Carbs

TILLOTSON CORE PLUG 9.6mm DIA For Most Carbs

TILLOTSON NOZZEL CHECK VALVE For Most HL Series Carbs

TILLOTSON LOW SPEED IDLE SCREW JET For Most HL Series Carbs

TILLOTSON HIGH SPEED MAIN SCREW JET with "T" BAR For Most HL Series Carbs

TILLOTSON SPRING for LOW & HIGH SPEED SCREW JETS For Most HL Series Carbs and HR Low Jet.

TILLOTSON BRASS WASHER for LOW & HIGH SPEED SCREW JETS. Fits most HL Carbs and HR Low Jet.

TILLOTSON RUBBER WASHER for LOW & HIGH SPEED SCREW JETS For Most HL Series Carbs and HR Low Jet.

TILLOTSON HL SCREW for IDLE SPEED ADJUSTMENT on Butterfly Shutter for Most HL Series Carbs

TILLOTSON HL SPRING for IDLE SPEED ADJUSTMENT SCREW on Butterfly Shutter for Most HL Series Carbs

TILLOTSON THROTTLE SHAFT with ARM. For most HL Series Carbs

TILLOTSON HL SCREW for THROTTLE CABLE for Most HL Series Carbs

TILLOTSON THROTTLE SHAFT RETURN SPRING for most HL Series Carbs

TILLOTSON U CLIP for THROTTLE SHAFT For Most HL Series Carbs

TILLOTSON HL SCREW for U CLIP for Most HL Series Carbs

TILLOTSON THROTTLE SHUTTER BUTTERFLY for HL Series Carbs. Fits 25.4mm

TILLOTSON THROTTLE SHUTTER BUTTERFLY for HL Series Carbs. Fits 27.2mm