TKM BT82 2-Stroke

TKM BT82 Junior 100cc 2 Stroke Air Cooled Engine TAG V Clutch Drive. Touch & Go onboard Electric Starter System Comes Complete with the following items included: NGK Spark Plug, Exhaust System Complete, TAG PVL Ignition System, Coil Bracket, Carb Restrictor Plate, Walbro Carburettor & Noise Box with Carb Mounting Flange, V Clutch, Complete wiring Loom with Start / Stop Push Buttons and Chassis Battery Mounting Kit with Standard Yuasa 12V 6.8AH Battery. Carb Restrictors Plates are available in 5 Sizes & Colours to suit Class weights and you will be asked prior to dispatch which restrictor is required. Chassis Engine Mount & Clamps & Bolts are not included in this engine package.

TKM BT82 Senior Extreme 115cc 2 Stroke Air Cooled Engine TAG V Clutch Drive. Touch & Go onboard Electric Starter System Comes Complete with the following items included: NGK Spark Plug, Exhaust System Complete, TAG PVL Ignition System, Coil Bracket, Carb Restrictor Plate, Walbro Carburettor & Noise Box with Carb Mounting Flange, V Clutch, Complete wiring Loom with Start / Stop Push Buttons and Chassis Battery Mounting Kit with Standard Yuasa 12V 6.8AH Battery. Chassis Engine Mount & Clamps & Bolts are not included in this engine package.

EeziStart De-Compression Valve Option for New TKM BT82 engine. Makes for easy starting on Direct Drive & Clutch Drive models. The EeziStart Valve option is not available for TAG engines as the starter speed RPM is too slow. This option must be ordered with new engines as it cannot be fitted at a later date unless purchased with a new replacement cylinder head. The EeziStart Valve is fitted into the cylinder head.

Factory Permormance + Fiching of your New TKM BT82 engine so that you engine is prepared to its optimum giving you the best BHP and lap times. Factory Fiching is always carried out so that your engine fully complies to the Formula TKM rules.

Factory Running In of your New TKM BT82 engine saving you valuable expensive track time so that you engine is virtually ready to race.

Factory Running In & Power Testing of your New TKM BT82 engine saving you valuable expensive track time so that you engine is virtually ready to race and also provides you with a print out of complete rev range showing BHP & TORQUE.

HOUR METER ENGINE RUNNING TIME RECORDER made by KART PRO. Has two recording funtions (Non-resetable total running time & resetable running time). Suits both 2 & 4 Stroke engines. Attach directly to spark plug HT lead. Comes with battery & instructions.

Kart Care COOL RUN Chain Spray in 400ml Spray Aerosol Can

SOCKET for ELECTRIC STARTER 1/2" SQ X 17mm Bi-Hex

Yuasa 12V 10AH Battery for the Coleman Hand Held Electric Starter

Cast Aluminium Engine Mount Top Plate to Fit Chassis with 30mm Tubes on 92mm Centre Lines. Pre-Drilled for engines with 80mm X 102mm & 80mm X 123mm Bolt Centres. Mating Face is machined. Weighs 658 Grams. Fits all TKM BT82 engines.

Cast Aluminium Engine Mount Complete with Clamps & Clamp Bolts to Fit Chassis with 32mm Tubes on 92mm Centre Lines. Pre-Drilled for engines with 80mm X 102mm & 80mm X 123mm Bolt Centres. Mating Face is machined. Fits all TKM BT82 engines.

Cast Aluminium Engine Mount Top Plate to Fit Chassis with 32mm Tubes on 92mm Centre Lines. Pre-Drilled for engines with 80mm X 102mm & 80mm X 123mm Bolt Centres. Mating Face is machined. Weighs 658 Grams. Fits all TKM BT82 engines.

Cast Aluminium Engine Mount Clamp to Fit Chassis with 32mm Tubes on 92mm Centre Lines. Uses M10 Centre Bolt. Bolt not included

Cast Aluminium Engine Mount Complete with Flush Type Clamps & Clamp Bolts to Fit Chassis with 30mm Tubes on 92mm Centre Lines. Pre-Drilled for engines with 80mm X 102mm & 80mm X 123mm Bolt Centres. Mating Face is machined. Fits all TKM BT82 engines.

CNC Machined Aluminium Engine Mount Clamp to Fit Chassis with 30mm Tubes on 92mm Centre Lines. Uses M10 Centre Bolt. Bolt not included. This type of Clamp give Extra Ground Clearance and is Black Anodised.

Cast Aluminium Engine Mount Complete with Flush Type Clamps & Clamp Bolts to Fit Chassis with 32mm Tubes on 92mm Centre Lines. Pre-Drilled for engines with 80mm X 102mm & 80mm X 123mm Bolt Centres. Mating Face is machined. Fits all TKM BT82 engines.

CNC Machined Aluminium Engine Mount Clamp to Fit Chassis with 32mm Tubes on 92mm Centre Lines. Uses M10 Centre Bolt. Bolt not included. This type of Clamp give Extra Ground Clearance and is Black Anodised.

M10 X 40mm Long Bolt for Chassis Engine Mount Clamp

M10 X 45mm Long Bolt for Chassis Engine Mount Clamp

YUASA BATTERY 12V 6.8AH for TKM BT82 TAG & TKM WTP 80cc & Rotax Max. Weight 2.5 Kilo. Battery does not include the optional angled male terminals.

Heavy Duty with Water Proof Rubber Glove Ignition Cut / Kill Switch for TKM BT82 V Clutch & TKM K4S engines.

Bracket for Mounting the Ignition Cut Out Switch to the Steering Column Top Support Bolt. Marked with ON / OFF Zinc Plate Steel

Throttle Inner Cable with Cylindrical End Nipple. Cable is 1.2mm DIA x 2000mm Long. End Nipple is 3mm Dia x 3mm Long First Quality. Fits TKM BT82 & TKM K4S and most other kart engines

Throttle Outer Cable Black 5mm Dia x 76cm Long. First Quality.

CABLE CLAMP CNC MACHINED, DOUBLE BOLT, BLACK ANODISED ALUMINIUM

CABLE CLAMP CNC MACHINED, DOUBLE BOLT, GOLD ANODISED ALUMINIUM

CABLE CLAMP PRESSED STEEL, DOUBLE BOLT, SILVER ZINC PLATED

Non-Hardening Petrol Fuel Pipe Best Quality 1 Meter Long